Projects' Wiki

You can edit any article in this section. Make sure you log in before starting to edit.

Elevator Wall Control (BFC)

by CarlmilCarlmil 11 May 2013 04:48

The Elevator Wall Control was constructed to make an convenient wall control for the people in the office, added more simpler interface. The Elevator Wall Control was made also see the statuses of the floor of the building whether it is locked or open.

HDMI Matrix Switch

by Kendro VillaruelKendro Villaruel 04 May 2013 02:39

This project allows to control the VS440 HDMI Switch from Startech using Arduino serial commands.

PoE (Power over Ethernet)

by Artie DuncansonArtie Duncanson 16 Apr 2013 10:11

RJ-45 Cables come with four pairs of wires. Two of these pairs transmit and receive data, the other two are not generally used. These unused wires can be utilized to provide power to devices ready to accept it if the Power Source Equipment (PSE) has a Power Over Ethernet (POE) connection. A POE device can be advantageous should you wish to provide power for your device where no power supply can be found or in locations where installation of a power supply is difficult.


by Kendro VillaruelKendro Villaruel 15 Mar 2013 02:06

Bigfoot Studios is looking to incorporate RFID access control over important locations throughout the property and many personal use doors as well (such as dorm rooms). The current applications of RFID at Bigfoot Studios are displayed in this Wikidot page.

Light Controller

by Peter LamPeter Lam 02 Mar 2013 03:46

The Light Controller board, developed by Bigfoot Studios, is used for turning lights off and on with the ability to control the brightness from the board itself. Thus far three separate projects have been or are being developed using it: 1.) A lighted staircase that flashes depending on which step an individual is on, 2.) An outdoor pathway that will display a light pattern when the motion detectors sense movement, 3.) And a large ceiling light with animation capabilities.

Guard Monitor

by Artie DuncansonArtie Duncanson 13 Feb 2013 08:16

The guard monitor was constructed as a means of making sure that the security guards do not sleep during their shift. At random intervals of 10-50 minutes the alarm will sound, and the guard must push a button to turn it off, thus confirming that he is awake and at his post.

Elevator Security Console (BFC)

by bf-scottbf-scott 08 Feb 2013 09:08

The Elevator Security Console is a control panel for the Bigfoot Centre building in Hong Kong that gives the security personnel the ability to restrict or allow access for employees and/or visitors who wish to go to the upper levels of the building by elevator. It controls access to 6 floors; 21F, 22F, 23F, 27F, 29F, 30F from the lobby desk, connected to the internet switch located in the lobby equipment room.

GSM Switch

by bf-scottbf-scott 05 Feb 2013 02:54

The GSM Switch is based on an Arduino electronics board and is an SMS (text message) controlled remote reboot device for appliances plugged into a relay controlled outlet(s).

What's missing on this template site?

by bf-scottbf-scott 02 Feb 2013 05:07

Things that do not work, and consequent change requirements for Wikidot:

Start a new Wiki article