Work 2013 3/11 to 3/16
bf-scott wrote on 19 Mar 2013 09:57
Here is what we've been working on this past week in the Arduino Lab…
- Miami RFID
- Code altered to free up memory for 100 RFID cards
- Inserted the Arduino Uno
- Watchdog timer encoded
- OLED screen troubleshooting
- Stability testing
- Hollywood Suite Door RFID (Andrew's)
- Watchdog Timer added to code
- Seeeduino board was optibooted
- A 3-Blink signal inserted to let us know if GSM module is initialized
- Door switch can now be held down for 10 seconds to reboot the device
- Emergency Door button added
- Buzzer tones and coding tested
- Reinstallation of device
- Guard Monitor
- Seeeduino boards were optibooted
- Walkie-Talkie interference tests were run
- Aluminum foil blankets created to dissipate RF interference with device
- Reinstallation of devices
- Elevator Panel
- Flickering on TFT screen removed
- LED dimness problem fixed through soldering
- GSM and TFT screen interference
- Voltage regulator system tested
- MP3 Shield and Amplifier board
- MP3 shield and amplifier board researched and tested.